Advanced Kid's Gold Finder Treasure Hunter Metal Detector Sensitive Control Toy

Description

Introduction
This metal detector can be used for detection of metals buried underground. With this detector you can hunt for coins, key and other matallic objects. It is easy to operate
The TS20A metal detector is suitable for the beginner of the treasure hunting hobbyist. Or if you' d like to cultivate the children's spirit of exploration, TS20A will be your smartest choice.
New Version! New Updates!
·Three energetic color: Blue, Yellow and Black. Colorful your treasure hunting.
·Equipped a electric torch. Against the dard enviroment surrounded.
·Foldable shaft. Smaller size, easier to carry.
Structure
1. Battery Compartment Cover
2. Power/Sensivity Knob
3. Earphone Jack
4. Adjustable Shaft
5. Clip
6. Shaft Lock Nut
7. Search Coil
Specification
Max. Detection Distance in the air (Use a 25 cent coin as the target):
more than 6cm
IP Degree:
IP20
Coil Diameter:
15.4 cm
Battery:
9V battery, 6F22 or equivalent, 1 piece
Length:
102 cm (adjustable)
Weight:
about 465g (including battery)
Operating Temperature:
0℃ to 45℃
Operating Aultitude:
0 to 2000 m
Assembly Instruction
1. Take out all parts from the shipping carton.
2. Insert the lower shaft into the upper shaft. (Do not insert the lower shaft too deep.)
3. Aim the location points on the front cover and back cover at the location hole on both sides of upper shaft until the two covers match perfectly. The clip and the handle should be in the same direction.
4. Lock the four screws into the front cover.
5. Rotate the shaft lock nut counter clockwise to secure the lower shaft.
Note:
a. The location points are on the inner surface of the front cover and back cover.
b. There are four screw holes on the front cover.
Powered by SoldEazy